Rescue Glue is instant bond for porous and non porous materials, just by just using the right viscosity. 1 Oz Fast Bonding Water proof, one component Solvent free Long lasting Does not expand as it cures, there’s usually no need to clamp your bond It can be used for dentistry, automobile, aerospace, electronics, medical, military cc Want to try another size? 0.5 Oz Fast Bonding 2 Oz Fast Bonding 8 Oz Fast Bonding
Rescue Glue is an acrylic resin which polymerize rapidly in traces of moisture and absence of air, forming long, strong chains, joining the surfaces together on a molecular level; thus, creating a very strong bond that’s nearly impossible to break apart.
Fast Bonding, bonds a wide variety of materials, has a very fast curing speed. Use it when the parts match up very well on any non-porous surface. It cures between 5 to 30 seconds. Different materials require different setting times. It reaches 40% of the bounding strength instantly and will slowly reach 100% within 24 hours. Do not use item until full drying has occurred. You can bond similar or different materials.
1. Clean any oil, old glue or excess of water.
2. Apply the glue to one surface only.
3. Align surfaces properly.
4. Press together for several seconds.
For difficult to bond materials, use Booster to one surface, and glue on the opposite side, when press together they will bond instantly. For rearview mirror, remove old glue and use sand paper on a piece of metal, then press for 30 seconds. We recommend to do it at evening, let it set over night, and next morning put the mirror on it. For holes, cracks or rebuild items, use baking soda as a filler, and just apply fast bonding glue on it, then you can sand it, drill it, paint it etc.
KEEP OUT OF REACH OF CHILDREN
Rescue Glue Uses:
Wood: Furniture making & repair, architectural models, picture frame making & repair, musical instruments, antique restoration, wood-turning, wood refinishing
Plastic/Rubber/Ceramics: Sign making repair, electrical component manufacturing, wire tracking, dental models, bridge works repair, cement dowel pins into models, seal models & dies, porcelain facings, protect margins & harden surfaces, popped veneers, shock absorber systems, Manufacturing/repair, Computer calculator manufacturing and repair, Display cases manufacturing and repair, Auto dashboard repair and rubber door moldings, Pool equipment manufacturing/repair, Permanent tubing couplings
Leather: Shoe repair, Auto upholstery, Luggage manufacturing/repair, Belt manufacturing/repair, Equestrian-Sporting goods Manufacturing/repair
Composites: Fiberglass, Kevlar, phenolic, graphite, etc.
Fiberglass auto body repair, Motorcycle fairing manufacturing and repair, Surfboard manufacturing and repair, Wetsuit manufacturing and repair
Metal/Minerals/Gems: Bonding parts temporarily for machining, turning or grinding, Thread locking, Jewelry manufacturing/repair, Solidifying soft stones and petrified wood for cutting and polishing, Knife making.
Bonds a wide variety of materials. It is extremely fast drying. It is used when the parts have good contact in any non-absorbent material. Dries in 5-10 seconds and different materials require different drying times. It reaches 40% of its strength instantly and slowly, it will reach 100% in the next 24 hours. If the parts have a lot of pressure, do not use them until they have reached their full force.
1. Remove oil, old glue and excess water
2. Apply the glue to a single surface
3. Arrange the pieces in the right place
4. Apply pressure for several seconds for Fast Bonding or use Accelerator for Thick Formula.
Keep out of reach of children
The user must take the necessary precautions and is responsible for the results.
For difficult-to-bond materials, use on one surface and Thick Formula on the opposite surface for immediate result. For the rear view mirror, press for 30 seconds and do it in the afternoon, letting it dry overnight before putting the mirror on. To fill holes, cracks or rebuild gaps, use the Industrial Multi-Filler, and apply drops of Fast Bonding Glue over it. Let dry to sand, drill or paint.